DC Power Supplies – Professional Series

High Voltage Power Supplies

Fug logo Blue
Power DC HIGH VOLTAGE 1

Power

Power range up to 50.000W.

 

Voltage

Output voltage 125V up to 300.000V, continuously adjustable from zero to maximum.

Applications

Series HCP from 3.5kV to 300kV / 14W to 15kW

In principle, the rectified line voltage drives a square wave generator of fixed frequency, whose AC voltage is transformed, rectified and filtered, producing the output voltage. For regulation, the square wave voltage is pulse width modulated. A low residual ripple of the output voltage, together with a high stability, high regulation speed and a low stored energy are all achieved by virtue of the high switching frequency.

 

Special Features

– Switch mode regulation
– Low ripple
– High stability
– High regulation speed
– Low stored energy

 

Download Data Sheet

Series HCH from 650V to 300kV / 20kW to 50kW

In principle, the rectified line voltage drives a square wave generator of fixed frequency, whose AC voltage is transformed, rectified and filtered, producing the output voltage. For regulation, the square wave voltage is pulse width modulated.

 

Special Features

– Switch mode regulation
– Low ripple
– High stability
– High regulation speed
– Low stored energy
– Output module air- or oil-insulated depending on voltage class

 

Download Data Sheet

Series HYN from 3.5kV to 20kV / 21kW to 70kW

The main voltage is transformed to high voltage potential. Either on the primary side or on the secondary side, a phase cutting circuit with thyristor is installed. The rectified voltage is smoothed by a LC-filter.

Special Features

– Thyristor regulation
– Robust in design
– High stability

 

Download Data Sheet

Series HCE from 125V to 35kV / 7W to 350W

In principle, the rectified line voltage drives a square wave generator of fixed frequency, whose AC voltage is transformed, rectified and filtered, producing the output voltage. For regulation, the square wave voltage is pulse width modulated.

 

Special Features

– Switch mode regulator
– Compact size and lightweight
– Analog programming included

 

Download Data Sheet

Series HCB from 1.25kV to 20kV / 1.4W to 200W

Bipolar HV power supplies consist of 2 switch-mode controlled HV sources which are connected to the output. In principle, the rectified line voltage in each source drives a square wave generator of fixed frequency, whose AC voltage is transformed, rectified and filtered, producing the positive or negative output voltage. For regulation, the square wave voltage is pulse width modulated. The operation is contra-moving, and the output can be adjusted with continuous zero crossing

 

Special Features

– Switch mode regulation
– Bipolar power supplies made of 2 power supplies

 

Download Data Sheet